Rubberflex 40 abrasion resistant rubber sheeting is applied as a soft rubber lining using either hot vulcanised or cold bonded systems.

Rubberflex 40 is available in cured and uncured form and applied to abrasive blasted components in accordance with BS6374:Part5:1985.

Cured hardness is 40 Shore A and exhibits excellent weather and physical properties for the most arduous applications, with excellent results in wet applications.


product Rubberflex 40
polymer Natural Rubber
colour Black or Pink
durometer 40 +/-5 (ASTM D2240 Scale A)
tensile strength 23.0 MPa (ASTM D412 Method A)
elongation @ break 630% (ASTM D412 Method A)
specific gravity 1.06
temperature range Max 70˚C (Cured)
curing method Steam Cure Autoclave/Pre-cured
NB. All results based upon laboratory cured samples, specification subject to change without notice.


Typical applications for these lining systems are:
  • pipe and spool lining
  • cyclones
  • launders
  • hose lining material
  • slurry handling